SE2200 Series

High Speed, Rigidity and Productivity CNC Turning Centre for next generation.

The Hyundai-Wia SE2200 Series offers the next generation of high-speed, accurate and economic CNC Turning Centres with high productivity and is designed with Hyundai-Wia’s engineering expertise to maximise productivity by enhancing rigidity and accuracy of machining.

Hyundai-Wia SE2200 Series Line-Up

Select each model in the SE Series via the table below for further product detail.

Model Chuck Bed Type Turret T/S
6″ 8″ 10″ Sub Standard Long Standard BMT45 MT#4

● : Standard    ○ : Option

Hyundai-Wia SE2200 Series

Excellent Machining Performance, Y-axis CNC Turning Center

  • 30° slanted one-piece bed structure with high rigidity
  • Compact product size allows installation in small areas
  • Improved user convenience by applying the latest controller of FANUC
  • Ensured high-rigidity applying Roller guideway on all axes (X/Z-axis: 30/36m/min)
  • Prepared user-oriented lineup including long-bed, mill turret and sub-spindle
  • Integrated processing through synchronized control of Main/Sub spindle
  • Ergonomic design for convenient access to chuck and tool
  • Stabilized unit structure to minimize thermal displacement

Hyundai-Wia SE2200 Series Video





Basic Structure

The Best Productivity 6″ / 8″ / 10″ Compact CNC Turning Center

1. All-In-One Type Of Bed

Enhanced Vibration Absorption Thanks To Increased Ground Area

Structural analysis was applied to the design of the machine to increase the tool post body and reduce the machine’s height so as to maintain the bed’s dynamic rigidity even during high-speed machining. In addition, the SE Series bed slope is pitched at 30 degrees to ensure more stable machining.

Floor Space (LxW)

Standard Bed 2,120×1,610 mm
Long Type Bed 2,970×1,610 mm

2. High-Speed Roller LM Guideway

Rigidity has Increased 30% Compared to the Ball Bearing LM Guide

Linear roller guideways are applied to reduce non-cutting time and bring high rigidity.

Rapid Traverse Rate (X/Z) 30/36 m/min
(1,181/1,417 ipm)
Travel (X/Z) Standard Bed 210/340 mm
Long Type Bed 210/560 mm

3. Wedge Type Y-Axis Structure

Y-axis additional type is designed with a wedge type Y-axis that is transferred by the simultaneous operation of the Ys-axis and the X-axis. In addition, excellent rigidity makes it possible to perform superb quality when machining high-accuracy machining.

Y-axis Rapid Traverse Rate 10 m/min (394 ipm)
Y-axis Travel 110 {±55} mm (4.3″)

Spindle & Turret

Heavy Duty Cutting & High Accuracy

1. 6”/8” Main Spindle

The main spindle is designed with the same structure often found in larger sized machines. The combination of double cylindrical roller bearings and angular contact ball bearings leads to excellent heavy-duty cutting performance. Also, machining performance is enhanced by applying ribstar belt to minimize noise and belt slipping problems.

Ribstar Belt

Applied the ribstar belt to minimize the slip and noise of the belt during processing, and this improvement enhanced performance of the work.

Labyrinth Structure

Increased processing stability by minimizing bearing damage caused by inflow of the oil.

C-Axis Control

C-axis of SE Series can be controlled to 0.001° which makes it possible to process various shapes.

2. 5″ Sub Spindle(‘S’ Type)

The Belt-type sub spindle is designed to minimize thermal displacement during the continuous machining, offering from the heavy-duty cutting to the high-speed machining.

When the main spindle cutting is completed, the sub spindle rotation is synchronized with the main spindle allowing the workpiece to be transferred to the sub spindle, and machining can begin on the back side of the workpiece.

ITEM Spindle Speed Motor (Max./Cont.) Torque (Max.) Driving Method
6″ Spindle 6,000 rpm (FANUC) 15/11 kW (20/15 HP) 127 N.m Belt
6,000 rpm (iTROL) 13.5/9 kW (18/12 HP) 114.5 N.m
8″ Spindle 4,500 rpm (FANUC) 15/11 kW (20/15 HP) 167 N·m
4,500 rpm (iTROL) 13.5/9 kW (18/12 HP) 150.3 N.m
10″ Spindle 3,500 rpm (FANUC) 18.5/11 kW (25/20 HP) 270 N.m
3,500 rpm (iTROL) 13.5/9 kW (18/12 HP) 197.6 N.m
Sub Spindle 6,000 rpm (FANUC) 7.5/3.7 kW (10/5 HP) 63.6 N.m
6,000 rpm (iTROL) 7.4/4.9 kW (9.9/6.6 HP) 47 N.m

3. Servo Turret

The turret of SE series is applied with high performance AC servo motor, improving machining reliability. 3-piece coupling shows excellent performance in indexing. Powerful hydraulic tool clamping minimizes tool tip deviation caused by load.

20Bar(290 psi) High Pressure Coolant OPTION

Turret is designed to utilize 20 bar (290 psi) high pressure coolant and it shows optimum performance in machining difficult-to-cut material.

4. BMT45 Turret (Mill Turret)

The BMT turret secures the tool with four bolts and key on the tool mounting surface of the turret, making it possible to powerfully fix the tool, ensuring high reliability in rigidity and precision.

Mill Tool Holder - Straight and angular milling head

Machining capability increases with the addition of milling head tool holders.



Special Tool

The SE series can process high value-added products using a variety of rotating tools. In particular, there is a multi-holder for attaching a variety of tools to one holder, and an eccentric rotary tool for handling eccentric parts without additional axis travel, which can realize integration of process with one machine.


Touch-type 15″ large monitor controller maximizes customer convenience / productivity

  • Standard Touch 15″ Large Monitor
  • Standard AICC 200 Block.
  • Standard Smart Guide-i
  • Standard machining condition selection function

15″ Touch-type Monitor as a Standard

Smart Machine Control Fast Cycle Time Technology
Fine Surface Technology
Conversational Program Smart Guide-i
i-HMI Machining-aid Function Part Program
AI Contour Control AICC-2 (200 blocks look-ahead)
Smooth Tolerance Control 0.1 ㎛ command and specify tolerance
Jerk Control Diminished vibration by controlling acceleration speed
Machining Condition Selection Designated machining level based on speed & quality
Machining Quality Control Function Smooth Tolerance+ integrated support
Part Program Storage 5120M (2MB)
No. of Registerable Programs 1000 EA