USED SORALUCE SL8000 Travelling Column Integral Bed Type Milling Machine – TWW Cat 7957
TRAVELLING COLUMN, INTEGRAL BED CNC MILLING CENTRE WITH MANUAL INDEXING HEAD.
- HEAVY-DUTY CAST-IRON BED CONSTRUCTION.
- HIGH PERFORMANCE LINEAR GUIDEWAYS.
- FRONTAL OPERATION THROUGH PENDANT MOUNTED OPERATOR PANEL & CONTROL.
ADDITIONAL INCLUDED ACCESSORIES, OPTIONS & TOOLHOLDERS
- HEIDENHAIN TNC407 CONTROL SYSTEM.
- CHIP CONVEYOR.
- TABLE & PERIMETER GUARDING SYSTEM.
- OPERATOR’S PENDANT.
- COOLANT EQUIPMENT.
- SPARE MILLING HEAD.
- SELECTION OF USED SPINDLE TOOLING.
- SPIRSIN NC ROTARY TABLE WITH 4-JAW MANUAL CHUCK.
- ROTARY FOLLOWER UNIT.
- SET OF ROLLER STEADIES.
- REAR & SIDE SAFETY FENCING.
Technical Specification
Technical Specification
Table (Bed) Working Surface
8,000 x 800 MM
Tee Slot (Size x Number x Pitch)
22 x 6 x 130 MM
Maximum Table Load
3,000 KGS / MM2
Longitudinal Column Travel (X-Axis)
6,500 MM
Vertical Travel (Y-Axis)
1,600 MM
Cross Travel (Z-Axis)
900 MM
Spindle Motor Power
(S1 - 100% at Continuous Rating) KW
Spindle Motor Power
(S6 - 40% at Continuous Rating) KW
Head Type
UNIVERSAL MANUAL
Head Spindle Speed - Max
4,000 RPM
Tool Taper
ISO50 - DIN69872 FORM A
Head Spindle Speed - Max
4,000 RPM
Number of Feeds
Stepless Adjustable
Feed Range
5 ~ 5,000 MM/MIN
Rapid Feeds (X / Y / Z)
15,000 MM/MIN
Feed Motor Power - X
37.0 NM
Feed Motor Power - Y
18.0 NM
Feed Motor Power - Z
18.0 NM
Voltage
415V / 50HZ / 3PH
Machine Length - L ~ R
11,300 MM
Machine Width - F ~ B
4,190 MM
Machine Height
3,850 MM
Watch in action
Services & Support
For over 140 years
