T: 0114 276 5411 Contact

Hankook Protec 13NE 6000 Flat Bed CNC Lathe

HEAVY DUTY, HIGH QUALITY FLAT BED CNC LATHE WITH HEAVY DUTY GEARED HEADSTOCK, HARDENED & GROUND BOX GUIDEWAYS. LARGE BORE & BORING EQUIPMENT OPTIONS

SPINDLE BORE OPTIONS – 13NA 105 MM, 13ND 330 MM, 13NE 381 MM, 13NF 440 MM

OTHER MODELS IN SERIES (SELECT FOR SPECIFICATION) – PROTEC 13NA 2000, PROTEC 13NA 3000, PROTEC 13NA 4000, PROTEC 13NA 5000, PROTEC 13NA 6000, PROTEC 13NA 7000, PROTEC 13NA 8000, PROTEC 13ND 2000, PROTEC 13ND 3000, PROTEC 13ND 4000, PROTEC 13ND 5000, PROTEC 13ND 6000, PROTEC 13ND 7000, PROTEC 13ND 8000, PROTEC 13NE 2000, PROTEC 13NE 3000, PROTEC 13NE 4000, PROTEC 13NE 5000, PROTEC 13NE 7000, PROTEC 13NE 8000, PROTEC 13NF 2000, PROTEC 13NF 3000, PROTEC 13NF 4000, PROTEC 13NF 5000, PROTEC 13NF 6000, PROTEC 13NF 7000, PROTEC 13NF 8000

Hankook Protec 13NE 6000 Flat Bed CNC Lathe
FEATURES
Heavy One Piece Cast Iron Bed Construction.
Heavy Duty Hardened & Ground Solid Slideways.
2-Step Automatic Gear Change.
Heavy Duty Tailstock.
Steady Rest & Boring Equipment Options.
Fully Enclosed & Interlocked Guarding System Options.
FANUC / SIEMENS CNC
Technical Specification
Options

Technical Specification

Std. Chuck Diameter
36" - 915 (380 Bore) [32" - 813 (380 Bore)] MM MM
Swing Diameter Over Bed
1,300 MM
Swing Diameter Over Carriage / Cross Slide
940 MM
Distance Between Centres
6,000 MM
Load Capacity Between Centres
8,000 KGS
Spindle Nose
A2-20
Spindle Speeds
2 ~ 450 RPM
Spindle Bore
381 MM
Spindle Power
37.0 / 45.0 KW
Number of Turret Stations
4 - H4 AUTO [8 - V8 AUTO]

Options

  • Work Light
  • Rotary Tailstock Spindle
  • Centre (MT#6 For Headstock & Tailstock)
  • Rear Side Full Splash Guard
  • Chuck Cover
  • Electrical / Mechanical Drawings
  • Tool Box With Maintenance Tools
  • Spindle Motor & Electrical Equipment
  • Automatic Gear Shift
  • Coolant System
  • Centre Sleeve MT#6 X1/10 Taper #120
  • Single Front Door [Full Guarding]
  • Levelling Block, Foundation Bolts & Nuts
  • Operator / Programmer Manuals
  • 4 Jaw Independent Chuck [Ø 32” N, 32” ND, 36” NE, NF 36”]