HYUNDAI-WIA HD2200 Slant Bed 2-Axis CNC Lathe – TWW Cat 7904
ON SPECIAL CLEANENCE OFFER – SAVE 38.5% – SUBJECT TO PRIOR SALE
STANDARD BED CNC TURNING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS, HIGH SPEED SERVO TURRET & 8″ STD CHUCK SIZE
STANDARD FACTORY FITTED MACHINE OPTIONS
- STD CHU – CHUCK CLAMP FOOT SWITCH MAIN SPINDLE
- STD CHU – 08 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS – MAIN SPINDLE
- STD CHU – CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE
- STD CHU – STANDARD HYDRAULIC CHUCKING CYLINDER – HOLLOW
- STD CNC.OP – 15″ TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i)
- STD CNC.OP – FOR STANDARD CNC SPECIFICATION – SEE MANUFACTURER’S BROCHURE
- STD CNC.OP – HW ENERGY SAVING SYSTEM (HW-ESS)
- STD CNC.OP – MACHINE GUIDANCE (HW-MCG)
- STD CNC.OP – SMART GUIDE-I (CONVERSATIONAL PROGRAMMING)
- STD CS – STANDARD COOLANT SYSTEM (NOZZLE)
- STD CS – STANDARD COOLANT SYSTEM 0.5 BAR
- STD CS – STANDARD COOLANT TANK 150 LITRES
- STD GUA – FULL SPLASH GUARDING SYSTEM
- STD HYD – STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES)
- STD LI – CALL LIGHT (1 COLOUR)
- STD MISC – MACHINE MANUALS & OPERATOR HANDBOOKS
- STD MISC – TOOLBOX
- STD TO – STANDARD TOOLING PACKAGE – SEE MANUFACTURER’S BROCHURE
- STD TS – QUILL TYPE TAILSTOCK WITH STD LIVE CENTER
INCLUDED FACTORY FITTED MACHINE OPTIONS
- CHIP – CONVEYOR SIDE HINGED WITH CHIP BOX
- CS – HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD (RATED AT 60HZ SUPPLY)
- PA – BARFEED INTERFACE – MAIN SPINDLE
- PA – PARTS CATCHER – MAIN SPINDLE
- POW – TRANSFORMER – 415V 3PH 50HZ
- PRO – QUICK TOOL SETTER – AUTO
- TS – PROGRAMMABLE TAILSTOCK IN LIEU OF STD
- CS – OIL SKIMMER
- CS – COOLANT GUN
FEATURES
One Piece Heavy Duty Cast Iron Bed Construction For High Accuracy & Rigidity
4,500 Rpm High Power Main Spindle
Heavy Duty Cutting With Excellent Performance
12 Station Rigid Turret
24 X 30 M/Min Rapid Traverse
Hardened & Ground Solid Box Guide Ways
HYUNDAI-WIA FANUC SMART PLUS CNC
Technical Specification
Options
Technical Specification
Std. Chuck Diameter
8" 203 MM
Swing Over Bed
550 MM
Swing Over Carriage / Cross Slide
390 MM
Max. Turning Diameter
380 MM
Max. Turning Length
565 MM
Spindle Nose
A2-6
Spindle Speeds
4,500 RPM
Spindle Bore / Bar Capacity
76 / 65 MM
Spindle Power
18.5 / 15.0 KW
Rapid Traverse Rates - X / Z
24 / 30 M/MIN
Number of Turret Stations
12
Options
- (10”) Ø 254 mm Hollow 3 Jaw Power Chuck.
- Set of Soft Jaws.
- Chuck Clamp Foot Switch.
- Standard Tooling Package.
- Quill Type Tailstock - MT#5.
- Standard Live Centre.
- Quick Tool Setter.
- Operation Manuals.
- Coolant Tank.
- Door Interlock.
- Total Splash Guard.
- Call Light.
- Tool Box.
- Levelling Pads & Bolts.
- Electrical & Mechanical Drawings.
