HYUNDAI-WIA SE2200LY Slant Bed, Y-Axis CNC Lathe – TWW Cat 7857
LONG BED CNC TURNING CENTRE WITH ROLLER LM GUIDEWAYS, HIGH SPEED SERVO TURRET, Y-AXIS, C-AXIS & DRIVEN TOOLS & 8″ STD CHUCK SIZE
STANDARD FACTORY FITTED MACHINE OPTIONS
- STD AX.POS – SPINDLE POSITIONING MAIN – 0.001 DEG INDEX (C1-AXIS)
- STD CHU – CHUCK CLAMP FOOT SWITCH MAIN SPINDLE
- STD CHU – 08 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS – MAIN SPINDLE
- STD CHU – CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE
- STD CHU – STANDARD HYDRAULIC CHUCKING CYLINDER – HOLLOW
- STD CNC.OP – 15″ MONITOR FOR FANUC
- STD CNC.OP – FOR STANDARD CNC SPECIFICATION – SEE MANUFACTURER’S BROCHURE
- STD CNC.OP – HW ENERGY SAVING SYSTEM (HW-ESS)
- STD CNC.OP – MACHINE GUIDANCE (HW-MCG)
- STD CNC.OP – MANUAL VIEWER
- STD CNC.OP – OPERATION MEMO
- STD CNC.OP – PART PROGRAM STORAGE – 2MB (1,000 REGISTERABLE PROGRAMS)
- STD CNC.OP – PREMIUM TOOL OPERATION
- STD CNC.OP – SCHEDULING
- STD CNC.OP – SMART GUIDE-I (CONVERSATIONAL PROGRAMMING)
- STD CS – STANDARD COOLANT SYSTEM (NOZZLE)
- STD CS – STANDARD COOLANT SYSTEM 0.5 BAR
- STD CS – STANDARD COOLANT TANK 200 LITRES
- STD GUA – FRONT DOOR INTERLOCK
- STD GUA – FULL SPLASH GUARDING SYSTEM
- STD HYD – STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES)
- STD LI – CALL LIGHT (1 COLOUR)
- STD MISC – BACK SPIN TORQUE LIMITER
- STD MISC – TOOLBOX
- STD SPGB – MAIN SPINDLE – 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN
- STD TO – STANDARD TOOLING PACKAGE – SEE MANUFACTURER’S BROCHURE
- STD TS – HYDRAULIC TYPE NC TAILSTOCK – MT#4 56 MM QUILL, STD LIVE CENTER
- STD TUR – 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM
INCLUDED FACTORY FITTED MACHINE OPTIONS
- CHIP – BUCKET STANDARD
- CHIP – CONVEYOR SIDE HINGED
- CS – HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD (RATED AT 60HZ SUPPLY)
- LI – CALL LAMP (3 COLOUR) – IN LIEU OF STD
- PA – BARFEED INTERFACE – MAIN SPINDLE
- PA – PARTS CATCHER – MAIN SPINDLE
- POW – TRANSFORMER – 415V 3PH 50HZ
- PRO – QUICK TOOL SETTER – AUTO
- TS – QUILL FORWARD / REVERSE CONFIRMATION DEVICE
- TUR – TURRET UPGRADE – 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW
FEATURES
8” Standard Chuck Size.
30° Slant Bed One Piece Heavy Duty Cast Iron Construction for High Accuracy & Rigidity.
High Performance Roller LM Guideways.
12 Station High Speed Rigid Servo Driven Tool Turret - BMT45. [24 Position Option]
4,500 RPM High Power Main Spindle.
30 x 36 M/MIN Rapid Traverse Rates – X & Z Axes.
HYUNDAI-WIA FANUC SMART PLUS CNC Control
C-Axis Spindle & Wedge Type Y-Axis.
Ergonomic Design for Easy Access to Chuck & Turret.
FANUC SMART PLUS CNC.
Technical Specification
Options
Downloads
Technical Specification
Chuck Size (Std.)
203 (8”) MM
Swing Diameter Over Bed
600 MM
Swing Diameter Over Carriage
600 MM
Maximum Turning Diameter
300 MM
Maximum Turning Length
508 MM
Y-Axis Travel
110 (+ -) 55 MM
Spindle Nose
A2-6
Spindle Bore / Bar Capacity
75 / 65 MM
Spindle Power
15.0 / 11.0 KW
Spindle Speed
4,500 RPM
C-Axis Indexing
0.001 DEG
Rapid Traverse Rates - X / Y / Z
30 / 10 / 36 M/MIN
Number of Turret Stations
12
Options
- 8” Ø 203 MM Hollow 3 Jaw Power Chuck
- Std. Soft Jaws
- Chuck Clamp Foot Switch
- Chuck Open / Close Confirmation Device
- C-Axis 0.001°
- Std. Tooling Package
- Hydraulic NC Tailstock (Std. Live Centre)
- Standard Coolant (Nozzles)
- Standard Coolant Pressure – 0.5 BARS
- Operation Manuals
- 200 L Coolant Tank
- Toolbox
- Call Light
- Total Splash Guard
- Door Interlock
- Smart Guide-i Conversational Programming
- Machine Guidance (HW-MCG)
- Energy Saving System (HW-ESS)
- Premium Tool Operation
- Other Features - See Manufacturer’s Brochure
Downloads
