Takisawa - Japan / Used & Reconditioned
USED Takisawa Japan TPS3300 Elliptical Gudgeon Pin Hole Machining - TWW Cat 7853
The machine is specifically designed for the finishing of gudgeon pin bores, which have a combination of elliptical, round, trumpet and straight geometric profiles. Special software has been developed for use in conjunction with the Fanuc 160iS-T control.
This enables virtually unlimited permutations of profile geometry, greatly simplifies programming and provides graphic display of the component through the specialist Takisawa software.
Formerly used in the UK Formula 1 motorsport industry and in excellent condition.
|Spindle Speed Range||1 ~ 1,000 RPM|
|Minimum Index Angle - C-Axis Increment||0.001 DEG|
|Spindle Nose||JIS A2-6|
|Spindle Bearing Inner Diameter||100 MM|
|Spindle Bore||63 MM|
|X-Axis Travel||230 MM|
|Z-Axis Travel||260 MM|
|Tool Spindle Taper||HSK-C40|
|Rotating Tool Speed||42,000 RPM|
|Rapid Traverse Rate – X||20 M / MIN|
|Rapid Traverse Rate – Z||20 M / MIN|
|Spindle Drive Motor / C-Axis||4.8 KW|
|X-Axis Servo Motor||2.0 KW|
|Z-Axis Servo Motor||1.0 KW|
|Rotating Tool Spindle Motor||15.0 KW|
|Coolant Pump Motor||0.55 KW|
|Automatic Oil Temp Regulator||1.8 KW|
|Hydraulic Pump Motor||2.2 KW|
|Coolant Tank Capacity||285 L|
|Lubrication Tank Capacity||6.0 L|
|MACHINE SIZE & WEIGHT|
|Machine Height||1,970 MM|
|Machine Floor Space||2,000 x 2,430 MM|
|Machine Weight||2,800 KGS|
Key Options & Features
- 10 Inch 2 Jaw Hydraulic Chuck with Long Stroke Including: -
- Floating Top Jaw
- Positioning Pin Pusher
- Extra M Function for Pusher
- Air Sensor Unit
- Filtermist Unit
- Operator Platform
- Chip Conveyor
- Spindle Through Coolant
Need a hand?
Our technical team are always on hand to help. Drop us a line and we'd be glad to be of assistance.