FIND A CNC MACHINE
CLOSE

CNC Machine Finder

Select from the options below to find the right machine for your needs

SELECT A MACHINE TYPE
  1. MACHINE TYPES
    1. HORIZONTAL LATHES (CNC) - SLANT BED ALL TYPES
      1. HORIZONTAL LATHES (CNC) - SLANT BED C-AXIS & DRIVEN TOOLS
      1. HORIZONTAL LATHES (CNC) - SLANT BED 2 AXIS
      1. HORIZONTAL LATHES (CNC) - SLANT BED TWIN SPINDLE [TURNING ONLY]
      1. HORIZONTAL LATHES (CNC) - SLANT BED TWIN SPINDLE C-AXIS & DRIVEN TOOLS
      1. HORIZONTAL LATHES (CNC) - SLANT BED MULTI TURRET
      1. HORIZONTAL LATHES (CNC) - SLANT BED MULTI TURRET C-AXIS & DRIVEN TOOLS
      1. HORIZONTAL LATHES (CNC) - SLANT BED Y-AXIS SINGLE & TWIN SPINDLE
    1. HORIZONTAL LATHES (CNC) - PISTON / ELLIPTICAL / PIN BORE MACHINING
      1. HORIZONTAL LATHES (CNC) - PISTON OD & OVAL MACHINING
      1. HORIZONTAL LATHES (CNC) - PISTON RING ID & OD APPLE SHAPED MACHINING
      1. HORIZONTAL LATHES (CNC) - PISTON PIN HOLE OVAL & BELL SHAPED MACHINING
      1. HORIZONTAL LATHES (CNC) - PISTON OD & OVAL MACHINING + GROOVING
    1. HORIZONTAL LATHES (CNC) - FLAT BED
      1. HORIZONTAL LATHES (CNC) - FLAT BED OIL COUNTRY
      1. HORIZONTAL LATHES (CNC) - FLAT BED C AXIS & DRIVEN TOOLS
    1. HORIZONTAL LATHES (CNC) - SINGLE SPINDLE WITH GANTRY LOADER
    1. HORIZONTAL LATHES (CNC) - TWIN SPINDLE WITH GANTRY LOADER
    1. VERTICAL BORING / TURNING MACHINES (CNC) ALL TYPES
      1. VERTICAL BORING / TURNING MACHINES (CNC) - COMPACT TYPE 2 AXIS
      1. VERTICAL BORING / TURNING MACHINES (CNC) - RAM & TURRET TYPE 2 AXIS
      1. VERTICAL BORING / TURNING MACHINES (CNC) - COMPACT TYPE C AXIS & DRIVEN TOOLS
      1. VERTICAL BORING / TURNING MACHINES (CNC) - RAM TYPE C-AXIS & DRIVEN TOOLS
      1. VERTICAL BORING / TURNING MACHINES (CNC) - MULTI PALLET 2 & 3 AXIS
      1. VERTICAL BORING / TURNING MACHINES (CNC) - DOUBLE COLUMN 2 & 3 AXIS
    1. HORIZONTAL LIVE SPINDLE BORING & MILLING CENTERS (CNC) - ALL TYPES
      1. HORIZONTAL LIVE SPINDLE BORING & MILLING CENTERS (CNC) - TRAVELLING TABLE TYPE
      1. HORIZONTAL LIVE SPINDLE BORING & MILLING CENTERS (CNC) - CROSS BED TYPE
      1. HORIZONTAL LIVE SPINDLE BORING & MILLING CENTERS (CNC) - TRAVELLING COLUMN FLOOR TYPE
    1. HORIZONTAL MACHINING CENTRES (CNC) - TWIN PALLET
    1. VERTICAL MACHINING CENTRES (CNC) ALL TYPES
      1. VERTICAL MACHINING CENTRES (CNC) - OPEN FRONTED
      1. VERTICAL MACHINING CENTRES (CNC) - OPEN FRONTED TWIN PALLET / DUAL TABLE
      1. VERTICAL MACHINING CENTRES (CNC) - DOUBLE COLUMN
      1. VERTICAL MACHINING CENTRES (CNC) - 5-FACE TRAVELLING TABLE
      1. VERTICAL MACHINING CENTRES (CNC) - 5-FACE TRAVELLING GANTRY
    1. 5-AXIS VERTICAL SPINDLE MACHINING CENTRES
      1. OVERHEAD TRAVELLING GANTRY TYPE - TRUNNION TABLE
      1. OPEN FRONTED MOVING COLUMN TYPE - TRUNNION TABLE
    1. MILLING MACHINES (CNC) ALL TYPES
      1. MILLING MACHINES (CNC) - TRAVELLING TABLE
      1. MILLING MACHINES (CNC) - TRAVELLING COLUMN INTEGRAL BED
      1. MILLING MACHINES (CNC) - TRAVELLING COLUMN FLOOR TYPE
      1. MILLING MACHINES (CNC) - TRAVELLING COLUMN FLOOR TYPE & LIVE SPINDLE
SELECT SUB MACHINE TYPE
VIEWMACHINES

News

All the latest news from Ward CNC

HYUNDAI-WIA LAUNCH NEW LARGE CAPACITY SLANT BED LATHE FOR 900 X 3,000 MM COMPONENTS

The use of a 12-position, quick-change (0.29 sec face/face) heavy duty tool turret makes the Hyundai-Kia SKT-700L & SKT-700LM turning centre a high quality, cost-competitive choice for large capacity turning /mill components required in the 900 x 3,000 mm component size range.

These brand new models, the SKT-700L & SKT-700LM with milling capability has 1,500 revs/min available from the 181 mm bore, 45 kW main spindle in three geared ranges and, with 610 mm chuck, the machine has a swing over the bed of 1,050 mm, swing over crosslide of 820 mm and a maximum turning diameter and length of 920 mm and 3,250 mm, respectively.

Available immediately from stock, the machine sets the benchmark in one-hit heavy-duty turning and milling operations by combining high power and spindle rigidity with impressive feed rates - rapids in both X and Z axes are 12m/min.

The programmable tailstock has a 132 mm travel, and quill diameter and travels are 160 mm and 132 mm, respectively and with Fanuc 21iT CNC featuring Manual Guide-i programming as standard along with the well-proven Q-setter for automatic tool setting both models are available with a variety of additional options including, hydraulic steady rests, auto door and chip conveyor.

Loading...
brand-hankook icon-search icon-menu brand-hartford brand-hyundai-wia brand-soraluce brand-takisawa-taiwan Takisawa-Machine-Tools icon-cta-arrow icon-cta-arrow-white icon-deals icon-download icon-register icon-retroFit icon-spares menu-bullet scroll-indicator icon-cta-arrow social-icon-facebook social-icon-google-plus social-icon-linkedin social-icon-twitter social-icon-youtube ward-cnc-logotype ward-cnc-logotype-mono